- Move {...props} before onCloseAutoFocus to prevent override
- Simplify handler to just e.preventDefault()
- Apply fix to both dialog.tsx and modal.tsx
* fix(tunnel): validate entry port conflicts before adding new entry nodes
- Add validateTunnelEntryPortConflictsForNewEntries to check cross-tunnel
port conflicts when adding new entry nodes to a tunnel
- Move validation before tx.Commit() to prevent partial success state
- Add contract test for issue #313 regression
- Update panel backend address description to note CDN/HTTPS support
Entire-Checkpoint: eb85eb0c9f2a
* fix: use single quotes to escape Chinese quotation marks in description
- Backend: return per-item failure details (id, name, reason) for all batch operations
- Frontend: add BatchActionResultModal component to display failures
- Support delete/pause/resume/redeploy/change-tunnel for forwards and tunnels
- Replace tunnel_quota table with user_quota table
- Add user-level daily/monthly quota tracking and enforcement
- Update user CRUD to include quota configuration
- Migrate backup/restore to use user quota fields
- Update frontend API and UI for user quota management
Implement per-tunnel traffic quota feature:
- Add TunnelQuota model with daily/monthly usage tracking
- Integrate quota enforcement into flow accumulation path
- Pause forwards and disable tunnel when quota exceeded
- Block new forward creation/resume when tunnel quota disabled
- Auto-reset daily/monthly windows at 00:05 via maintenance job
- Add manual reset API endpoint for admins
- Include quota config in tunnel backup/restore
- Add frontend UI for quota settings and usage display
Entire-Checkpoint: e629b27ca437
- Add renewal_cycle field to nodes for tracking paid vs free cycles
- Implement auto-advance scheduling when renewal is processed
- Add migration test for renewal_cycle column
- Update dashboard to show renewal cycle count
- Add renewal status display on node detail page
- Return actual user_tunnel.status in admin permission list instead of hardcoded 1
- Allow non-admin users to update forwards when keeping the same speedId selection
- Add contract tests for user tunnel status mapping and forward permission edge case
Entire-Checkpoint: deb90fb942ee
- Normalize whitespace in error messages to handle collapsed variants (e.g., 'address alreadyin use')
- Delete all forward service name variants (_tcp, _udp, base) during cleanup instead of stopping after first success
- Add comprehensive test coverage for edge cases
When tunnel services encounter 'address already in use' errors during
creation/update, automatically cleanup and retry once instead of failing
immediately. This handles race conditions during rapid tunnel reconfiguration.
Entire-Checkpoint: 39e6fb9de836
* fix: tolerate service not found during forward deletion
- Refactor deleteForwardServicesOnNode to handle not-found errors gracefully
- Extract deleteForwardServiceCandidates helper for reuse
- Add tests for not-found tolerance scenarios
- Ensures compatibility with legacy node versions
Entire-Checkpoint: a3bacf836c57
* fix: add forward port occupancy validation and runtime residual cleanup
- Add forward port occupancy validation on create/update paths
- Extend self-occupy recovery to clean residual candidate service names
- Add regression tests for address-in-use recovery with legacy runtime residue
Fixes port conflict issues when upgrading from 2.1.6 to later versions
Entire-Checkpoint: fb0a2aee4cb5
When upgrading from older versions, service names changed from
placeholder IDs (forward_user_0) to real user_tunnel IDs, causing
service not found errors during control operations.
- Add fallback cleanup+rebuild logic on UpdateService when service
not found during the upgrade transition period.
- Add self-healing retry on Pause/Resume when all variants are missing.
- Refactor controlForwardServicesOnNode to support unit testing.
- Add tests for shouldSelfHealForwardServiceControl and
controlForwardServiceCommand helper functions.
Entire-Checkpoint: a7f0c3175d06
- Move user tunnel resolution before building service base name
- Add buildForwardServiceBaseWithResolvedUserTunnel helper
- Ensure service names carry the actual user_tunnel ID instead of 0
Entire-Checkpoint: 9559e6447fda
* feat: restrict user permissions and multi-node IP constraints
- Non-admin users cannot set speedId or inPort on forward create/update
- Multi-entrance tunnels disable custom listen IP for forwards
- Multi-exit tunnels disable custom connect IP
- Multi-node hop chains disable custom connect IP per hop
- Remove tunnel-first-IP fallback in forward ingress resolution
- Add contract tests for non-admin permission restrictions
Entire-Checkpoint: 133693290660
* fix: allow non-admin users to submit null speedId and zero inPort
- Backend: Check speedId is not nil before rejecting non-admin requests
- Backend: Only reject inPort if value > 0 for non-admin users
- Frontend: Only include speedId and inPort in payload for admin users
- Tests: Add contract tests for null speedId and zero inPort cases
- Non-admin users cannot set speedId or inPort on forward create/update
- Multi-entrance tunnels disable custom listen IP for forwards
- Multi-exit tunnels disable custom connect IP
- Multi-node hop chains disable custom connect IP per hop
- Remove tunnel-first-IP fallback in forward ingress resolution
- Add contract tests for non-admin permission restrictions
Entire-Checkpoint: 133693290660
- Add speed_limit and auto_clear fields to forward update mutation
- Update user tunnel save to preserve these fields
- Add contract test for forward save preserving speed_limit
- Add plan documents for the fixes
When a forward service is updated with a bind IP that doesn't exist on the
host network interfaces, the system now automatically falls back to the
default bind address (listening on all interfaces) instead of failing.
- Added syncForwardServicesWithWarnings to collect fallback warnings
- Implemented fallbackForwardPortToDefaultBind for graceful degradation
- Added UpdateForwardPortBindIP repository method to persist fallback
- Enhanced error detection for 'cannot assign requested address' errors
- Frontend displays warning toasts when fallback occurs
- Added comprehensive unit tests for new error detection functions
When UpdateService encounters bind address conflicts (port already in use),
the handler now automatically deletes existing forward services and retries
the AddService operation. This resolves issues where a forward's own stale
listener prevents the update.
- Add isBindAddressInUseError() to detect port bind conflicts
- Add rebindForwardServiceOnSelfOccupiedPort() for automatic cleanup and retry
- Add HasOtherForwardOnNodePort() repository method to verify port ownership
- Add unit tests for bind conflict detection
- Add replaceForwardPortsPreservingInIP to maintain existing InIP values
- Track inIpTouched state in frontend to distinguish user changes
- Only send inIp in update request when user explicitly changed it
- Add unit tests for forward port replacement with preserved InIP
- Pass connectIp through resolveChainProbeTarget in diagnosis stream start items
- Pass connectIp in appendChainHopDiagnosis for full chain probes
- Reconstruct tunnel state with connectIp field preserved
- Fix forward service config when bindIP already contains port
- Add contract tests for connectIp diagnosis scenarios
- Add unit test for bindIP with port in buildForwardServiceConfigs
- Update AGENTS.md with plan document rules
Entire-Checkpoint: 35a2e61c2431
* feat: add comprehensive migration test for legacy columns
- Add ExtraIPs, TCPListenAddr, UDPListenAddr to Node migration
- Add ip_preference to Tunnel migration
- Add test for very legacy database migration (1.x schema)
- Include issue #211 tracking document
Entire-Checkpoint: 0d086883c34a
* fix: apply custom IP binding to forward and tunnel chain services
Entire-Checkpoint: ceff329d4cf4
- Add extra_ips field to nodes for multi-IP servers
- Add connect_ip field to chain_tunnel for specifying connection address
- Add in_ip field to forward_port for specifying listen address
- Frontend: add UI controls for extra IPs on node form
- Frontend: add connect IP input for tunnel chain nodes
- Frontend: add listen IP input for forward form
- Backend: resolve forward ingress with custom listen IP priority
Entire-Checkpoint: 557563462c16
* fix(diagnosis): avoid result channel deadlock in progress stream
Close the diagnosis result channel asynchronously after workers complete so progress can stream without blocking, and improve tunnel card type chip contrast for clearer protocol distinction.
* feat(diagnosis): stream pending items and render in-progress states
Pre-populate diagnosis stream with pending targets so tunnel and forward dialogs can show per-item diagnosing status immediately. Update result typing and UI states to distinguish in-progress, success, and failure rows/cards consistently.
- Add SSE streaming endpoints for tunnel/forward diagnosis with real-time progress
- Increase diagnosis timeout to 2 minutes with context propagation
- Group forwards by tunnel within user groups in UI
- Add nginx SSE proxy configuration for streaming endpoints
- Add file upload support for logo and favicon with automatic PNG conversion
- Add backend validation for brand asset data URLs (app_logo, app_favicon)
- Change vite_config.value column type from varchar(200) to text for PostgreSQL
- Add schema migration v3 for vite_config.value column type conversion
- Update frontend to use file picker instead of manual URL input
- Add early favicon application in index.html to prevent flash
sagit